March 2024: 400 polos, 600 event tees, and a decision I made too fast
When I took over purchasing in 2020, my remit was office supplies, furniture, and the coffee contract. Apparel came later — staff polos, event shirts, the branded quarter-zips nobody actually wears. By early 2024 I was running 60–80 orders a year across 9 vendors, and roughly $46,000 of that was what I'd loosely call "wearables."
Then operations handed me a scope: 400 front-of-house polos, 600 tees for a charity 5K we sponsor, and 90 "nicer" shirts for the client-facing team who'd been complaining that the standard polo made them look like they worked at a car wash (their words, not mine).
I did what I always do: three quotes, cheapest middle option, done. The winning supplier came in about 30% below the others (which, honestly, should have been my first clue). Delivery was on time. The shirts looked fine in the box.
They looked fine for about six weeks.
By week seven, the polos had pilled under the arms and along the collar. Two of the event tees shrank a full size after the first wash and came back to me as complaints from the 5K team. The "nicer" shirts — I'd ordered them in a soft, drapey fabric the rep called "premium viscose" — came out of the dryer wrinkled enough that the reception team quietly stopped wearing them.
I knew I should have asked for a fiber spec sheet before signing off. But it was polo shirts. I thought, what are the odds? The odds caught up with me at about $1,900 in reprints and a very polite email from my VP asking why the front desk looked "sad."
The label said "cotton lycra." I had no idea what that meant.
That's the embarrassing part. I buy things for a living and I could not have told you what cotton lycra fabric actually was.
So I did the reading I should have done in March.
First: LYCRA® is a brand, not a fiber category
LYCRA® is a registered trademark. It is not the generic name for the stretch fiber in your leggings, even though half the internet uses it that way. The generic fiber is elastane (the term used in most of the world and in ISO fiber labeling) or spandex (the term used in the US). Same chemistry. Different word on the label depending on where the garment is sold and who is writing the copy.
This matters more than it sounds. When a supplier writes "cotton lycra fabric" on a quote, they usually mean "cotton blended with some percentage of elastane." When they write "95% cotton / 5% LYCRA®," they're claiming a specific branded ingredient — and that claim comes with a licensing and hangtag program behind it. One is a description. The other is a statement a mill has to be approved to make.
On percentages, roughly: everyday cotton stretch knits run 92–95% cotton with 5–8% elastane. Below about 4% you get "comfort stretch" — enough for a t-shirt to move with you, not enough to hold shape in a legging. Above 10% you're in swimwear and compression territory, which is a different conversation entirely.
None of the cheap quotes I received in March listed a percentage. Not one.
Second: a spec sheet is not red tape
I went back to all three suppliers with the same request: fiber content by percentage, fabric weight in gsm, shrinkage after three washes, pilling rating. Two sent something within a day. The third sent a photo of a hangtag.
The two that responded properly quoted differently than they had in March — and the numbers moved. The cheap quote had been "cotton rich," which in practice meant a poly blend with a cotton-sounding name. The mid-priced one came back with 95/5 cotton-elastane, 180 gsm, and a pilling test result I could actually read.
It cost about $0.40 more per shirt. Across 400 polos that's $160. My reprint disaster had cost $1,900.
Here's the part I have to be fair about: generic elastane is not automatically bad. There is plenty of good spandex in the world made by mills that will never put a brand hangtag on anything, and I've bought some of it since. The problem was never "branded versus unbranded." The problem was that I couldn't tell which was which, and neither could my quote sheet.
What changed my process was simpler than a brand preference: when a mill is licensed to use LYCRA®, there's a paper trail. They've been approved, there's a hangtag program with rules attached, and there's usually a technical contact who will answer an email about shrinkage at 9pm the night before a deadline. That's a filter, not a guarantee. But a filter is exactly what I was missing.
The 90 shirts turned into a lesson about lyocell and viscose
The client-facing shirts were the harder problem. The team wanted something that looked more polished than a knit polo but wouldn't need ironing every morning. My rep sent three swatches: a cotton-elastane piqué, a lyocell poplin, and a viscose blend.
I'd never bought lyocell fabric before. Or viscose. I asked what the difference was, expecting a two-line answer. I got a 40-minute call.
Lyocell fabric, briefly
Lyocell is a regenerated cellulose fiber — wood pulp dissolved and spun into filament. What separates it from older cellulose fibers is the solvent: the lyocell process uses an amine oxide solvent in a closed loop and recovers something like 99% of it. That's the short version; the long version involves chemistry I only half followed.
The characteristics I actually cared about, having now washed 300 of these shirts for over a year:
- Drape and hand-feel. It hangs like something silk-adjacent without the care instructions. This is why it got shortlisted in the first place.
- Moisture handling. It moves moisture away from skin faster than cotton does. On a 90-degree trade show floor, the sales team noticed.
- Strength when wet. This is the real difference versus viscose — lyocell keeps most of its strength in the wash, so it doesn't come out looking like tissue paper.
- Wrinkles. It still wrinkles. Less than viscose, more than polyester. Anyone who tells you otherwise is selling something.
- Cost. Roughly 20–30% above a comparable cotton poplin in the quotes I received (as of mid-2024; I haven't re-quoted since, so verify before you budget).
What is viscose fabric, and why I didn't pick it
Viscose is also regenerated cellulose — same wood pulp family, older process, harsher chemistry, generally cheaper. In the US you'll often see it labeled rayon. It's soft, it absorbs moisture well, and it drapes beautifully. It's also weak when wet, prone to shrinking, and it wrinkles if you look at it wrong.
For a shirt that 90 people would wear to client meetings and then take home and wash themselves, unsupervised, on whatever cycle their machine defaults to? Viscose was the wrong answer. Lyocell was the better one. Neither was free.
Where I'd flip that recommendation: if you're buying a drapey blouse that gets dry-cleaned and worn for a photo shoot, viscose is fine and the cost difference is real money. If you're buying for a warehouse team washing uniforms at 60°C twice a week, neither lyocell nor viscose should be on your list — go back to cotton-elastane or a cotton-poly blend and stop overthinking it.
What actually changed
By Q4 2024 we had consolidated from 9 apparel vendors to 3. Not because the others were bad — two of them simply couldn't produce a spec sheet without a week of emailing, and I don't have a week.
I built a one-page template that now goes out with every apparel RFQ. Four fields. Fiber content, percentages, weight, shrinkage after three washes. In that order. Suppliers who can't fill it in don't get a second quote. It took twenty minutes to make and it has saved me more arguments than any process document I've ever written.
The numbers, if you want them: apparel reprints and returns went from about $4,300 in 2023 to $610 in 2024. Ordering time per apparel run dropped from roughly 6 hours of back-and-forth to about 2. That's the whole ROI story. There's no dramatic ending.
What I'd tell another admin buyer
It took me about 18 months and three bad uniform cycles to understand that the fiber spec on the inside label matters more than the unit price on the quote. Not because cheap fabric fails — because cheap fabric fails quietly, six weeks later, in a way that lands on your desk as a complaint instead of an invoice.
Three things I'd pass on:
- Ask for percentages, not adjectives. "Cotton rich," "premium blend," and "soft-touch" mean nothing on a spec sheet. 95/5 means something.
- Match the fiber to the washing machine, not the sales pitch. Lyocell for client-facing shirts that get gentle care; cotton-elastane for anything that touches a warehouse floor.
- If the price is 30% below everyone else, get the spec sheet before you get excited.
And the honest caveat: this worked for us at 320 people, with predictable annual volumes and three stable teams. If you're a 15-person shop ordering 40 shirts once a year for a company picnic, none of this matters. Buy the mid-priced cotton tee, don't specify a brand, and go home. The calculus only changes when volume turns a $0.40 delta into a $1,900 mistake.
I can only speak to what I've bought and washed. If you're sourcing overseas with your own fabric inspection, or you're in swimwear where the elastane percentage and chlorine exposure are a completely different conversation, there are variables here I haven't touched.